Disconnecting The Adapter; Turning Your Phone On And Off; Turning Your Phone On; Turning Your Phone Off - LG G7200 Guia Del Usuario

Getting started

Disconnecting the adapter

1. When charging is finished, the moving bars of the battery icon stop
and 'Full' is displayed on the screen.
2. Unplug the adapter from the power outlet. Disconnect the adapter
from the phone by pressing the grey tabs on both sides of the
connector and pull the connector out.
Note
• Ensure the battery is fully charged before first using the phone.
• Do not remove the battery or SIM card while charging.
• In the case the battery is not properly charged, please turn the
phone off and on using the power key, then recharge the battery.
After detaching and reattaching the battery, please recharge the
battery.
G7200 User Guide
22
Getting started

Turning your phone on and off

Turning your phone ON

1. Install a battery to the handset and connect the phone to an
external power source such as the travel adapter, cigarette lighter
adapter or hands-free car kit. Or install a charged battery pack to
the handset.
2. Press for a few seconds until the LCD screen is turned on.
3. Depending on the status of the
need to enter your PIN code.
Note
Like any other radio devices, avoid any unnecessary contact with
the antenna while your phone is on.

Turning your phone OFF

1. Press for a few seconds until the LCD screen is turned off.

Access codes

You can use the access codes described in this section to avoid
unauthorised use of your phone. The access codes (except PUK and
PUK2 codes) can be changed by using the
[Menu 9-4-4]. See page 91.
PIN code (4 to 8 digits)
The PIN (Personal Identification Number) code protects your SIM card
against unauthorised use. The PIN code is usually supplied with the
SIM card. When the PIN code request
will request the PIN code every time the phone is switched on. When
the PIN code request is set to Disable, your phone connects to the
network directly without the PIN code.
G7200 User Guide
PIN code request setting you may
Change codes feature
is set to Enable, your phone
23