Philips SBC SC205 Modo De Empleo página 10

P
ROBLEM
Problem
Overflow of water. Empty some water from the inner
container.
Bottle floats. Empty some water from the inner
container.
Temperature too low. Leave bottle in container for a few seconds
after the indicator light has switched off,
or increase the adjustment setting.
Temperature too high. Lower the adjustment setting.
Remove bottle when indicator lamp goes
out.
The jar has not heated Stir the contents from time to time while
correctly. heating. Check that the click-step control
knob is in the "
Unit does not warm up. Wait 15 minutes between consecutive uses
to allow the safety cut-out to reset.
Indicator light switches on This is normal (it may turn on or off while
and off while keeping heating).
warm.
Indicator light does not Shield indicator from ambient light to
seem to light. improve visibility.
The bottom of the tank is Hard water deposits are normal and may
spotted. increase if your water is very hard; remove
the deposits periodically with white
vinegar.
10
ifusc205USAbk.p65 10
S
OLVING
Solution
" position.
S
PÉCIFICATIONS TECHNIQUES
Modèle SBC SC205
Alimentation :
Consommation électrique :
Température ambiante opérationnelle :
Protection :
Conformité norme de sécurité :
Modèle SBC SC215
Alimentation (secteur) :
Consommation électrique (secteur) :
Alimentation (batterie de voiture) :
Consommation électrique (batterie de voiture): 80 Watts
Température ambiante opérationnelle :
Protection :
Conformité norme de sécurité :
19
16/05/2001, 11:58
110-120V CC
100 Watts
entre 44.6°F (+7ºC) et 98.6°F
(+37ºC)
système de chauffage à contrôle
PTC de la température
conforme à UL 1026
110-120V CC
90 Watts
12V CC
entre 44.6°F (+7ºC) et 98.6°F
(+37ºC)
système de chauffage à contrôle
PTC de la température
conforme à UL 1026