UNPACKING
This product requires assembly.
Carefully remove the product and any accessories from the box.
Make sure that all items listed in the packing list are included.
PACKING LIST
- Blower / Vac with Tubes
- Shoulder Strap
- Collection Bag
- Owner's Manual
Inspect the product carefully to make sure no breakage or
damage occurred during shipping.
Do not discard the packing material until you have carefully
inspected and satisfactorily operated the product .
If any parts are damaged or missing, please call our customer
service help line at 1-800-618-7474 for assistance.
WARNING: If any parts are damaged or missing do not operate
this product until the parts are replaced. Failure to heed this
warning could result in serious personal injury.
WARNING: Do not attempt to modify this product or create
accessories not recommended for use with this product .Any
such alteration or modification is misuse and could result in a
hazardous condition leading to possible serious personal injury.
WARNING: Do not connect to power supply until assembly is
complete. Failure to comply could result in accidental starting
and possible serious personal injury.
CORD RETAINER
A cord retainer is attached to the
power cord.
If using more than one extension
cord, first tie the two cords in a knot
as shown in Fig. 1.
Then, double the extension cord
several inches from the end and
hook the loop formed by doubling the cord over the cord retainer
before connecting to the Blower/Vac plug.
SHOULDER STRAP INSTALLATION AND USAGE
Attach the strap clip to the top of main body. See Fig. 2.
With machine on operation's right hand side, place shoulder
strap across chest and over left shoulder.
ASSEMBLY
TO INSTALL THE COLLECTION BAG
To install the collection bag, insert the buckle of bag holder into the
slot closer to the tube on the housing. Push the bag holder down
slightly. It will click into position when properly installed. See Fig. 3.
TO REMOVE THE COLLECTION BAG
Press the spring lever to release the bag. See Fig. 4.
Fig. 1
Fig. 4
Fig. 2
4
Model BVM23014S
Slot
Spring lever
Fig. 3