Promaker PRO-TP500 Manual Del Usuario página 5

to operate the power tool. Power
tools are dangerous in the hands of
untrained users.
Maintain power
for misalignment or binding of
moving parts, breakage of parts
and any other condition that may
affect the power tool's operation.
If damaged, have the power
tool repaired before use. Many
accidents are caused by poorly
maintained power tools.
Keep cutting tools sharp and
clean. Properly maintained cutting
tools with sharp cutting edges are
less likely to bind and are easier to
control.
Use the power tool, accessories
and tool bits etc. in accordance
with these instructions, taking
into account
conditions and the work to be
performed. Use of the power tool
for operations different from those
intended could result in a hazardous
situation.
Hold power tools by insulated
gripping surfaces
performing an operation where
the cutting tool may contact
hidden wiring or its own cord.
Contact with a "live" wire will make
exposed metal parts of the tool "live"
and shock the operator.
Use auxiliary handles supplied
with the tool. Loss of control can
cause personal injury.
tools. Check
the working
when
Service
Have your power tool serviced by
a qualified repair person using
only identical replacement parts.
This will ensure that the safety of the
power tool is maintained.
WARNING: Know your drill.
Do not plug in the drill until
you have read and understand
this Instruction Manual. Learn
the tool's
limitations, as well as the specific
potential hazards related to this
tool. Following this rule will reduce
the risk of electric shock, fire, or
serious injury.
Always wear eye protection.
Any power tool can throw
foreign objects into your
eyes and cause permanent eye
damage. ALWAYS
goggles (not glasses) that comply
with ANSI safety standard Z87.1.
Everyday glasses have only impact
resistant lenses. They ARE NOT
safety glasses.
WARNING: Glasses or goggles
not in compliance with ANSI Z87.1
could cause serious injury when
they break.
WARNING:
applications
wear safety
Always use
and
a
5