Harbor Breeze 40308 Manual Del Usuario página 6

ASSEMBLY INSTRUCTIONS
5. Remove the existing wire connectors from the white
and blue wires labeled FOR LIGHT in the switch
housing. Connect the white wire from the light kit
fitter (A) to the white wire from the fan. Connect
the black wire from the light kit fitter (A) to the blue
wire from the fan. (Fig. 5a/Fig. 5b) If applicable,
reconnect the male plug from the motor housing to
the female plug from the switch housing. Ensure the
plugs connect securely (Fig. 5a).
WARNING: To reduce the risk of fire, electrical
shock or personal injury, each wire connector used
with this light kit should accept only one 18-gauge
wire from the light kit and one 18-gauge wire from
the ceiling fan. If there are three or more wires
to connect or any of the wires is larger than 18
gauges, consult an electrician for the proper size
wire connectors to use.
6. Reconnect the wire connectors and twist in a
clockwise direction. Wrap electrical tape (not
included) around each individual wire connector
down to the wire.
7. Align three holes in the switch housing cap with
three holes in the switch housing plate. Reattach
the switch housing with the three screws that
were removed in Step 2. Tighten all screws
securely (Fig.7a).
Note: To reconnect the switch housing cap, align
the holes in the switch housing cap with the
holes at the bottom of the switch housing and
use the three previously removed screws to
secure the switch housing cap. (Fig. 7b).
Note: When attaching switch housing or switch
housing cap, turn assembly as necessary
to ensure fan pull chain falls between glass
shades and functions without interference.
5a
Switch
Housing
5b
Motor
Housing
Switch
Housing
Cap
6
7a
Switch
Housing
Plate
7b
Lowes.com/harborbreeze
6
White White
Black Blue
Male
Plug
Female Plug
Blue
White
White
Black
A
A
Motor
Housing
Switch
Housing
Motor
Housing
Switch
Housing
A