Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
1.800.561.8187
WPP1 OVERVIEW
2. Pressure Probe (WPP1): Hub 4 & Hub 6
A. Cable connector plug-in: for connecting the
pipe clamp sensor (WPC1).
A.
B.
B. Battery cover
C. Light: Blinks
GREEN
C.
on and blinks
RED
D. Power Button: Hold for one second to
D.
power on
E. 1/4"pressure connector
E.
F. 1/4" pass-through connector
F.
*NOTE: Low battery indicator is in the "Tool
Connection" screen
GENERAL SPECIFICATIONS
Operating Temperature: 14°F to 158°F
(-10°C to 70°C)
Storage Temperature: 14°F to 140°F
(-10°C to 60°C)
Operating Humidity: 30% RH to 85% RH
Over-range: 1000 PSI
Dimensions: 6.70 in x 1.56 in x 1.44 in
(17 cm x 4 cm x 3.7 cm)
Item Weight: 7.4 oz (210 gr)
Certification: CE Conformity, FCC/IC
Battery Type: (AA) 2
Battery Life: 100+ hours
Battery level
are displayed in the tool
connection screen to the right of each
probe connected.
Caution: Take care not to lose the screws when
opening battery compartments
•
Remove battery cover.
•
Replace the old batteries with 2 new
(AA) batteries.
•
Replace the battery cover.
WPC1 OVERVIEW
3. Pipe clamp sensor (WPC1): Hub 4 & Hub 6
A. Temperature sensor
B.
B. Cable connector plug-in: for connecting
WPC1 to the WPP1.
NOTE: Maximum pipe diameter for WPC1 is 1.5 in.
GENERAL SPECIFICATIONS
Operating Temperature: -40°F to 185°F
A.
(-40°C to 85°C)
Storage Temperature: 14°F to 140°F (-10°C to 60°C)
Dimensions: 5.66 in x 3.81 in x 1.10 in
(14.4 cm x 9.7 cm x 2.8 cm)
Item Weight: 2.1 oz (60 gr)
Certification: CE Conformity, FCC/IC
UEi HUB OVERVIEW
A. Home Screen:
Refrigerant Side
Hub
Refrigerant Side
Air Side
A.
select tool
--.--°F
Suction
Line Pressure
Vapor
Saturation
select tool
B.
Line Temp
--.--°F
Superheat
C.
R507A
--.--°F
Subcooling
D.
select tool
--.--°F
Liquid
Line Pressure
Liquid
Saturation
select tool
E.
Line Temp
A. Suction Line Pressure
F.
Refrigerant List (tap to view)
B. Suction Line Temperature
G. Air Side Screen (tap or swipe
C. Refrigerant Favorites (tap to view)
left to view)
D. Liquid Line Pressure
H. Vapor Saturation Temperature
E.
Liquid Line Temperature
I.
Liquid Saturation Temperature
A. Home Screen:
Air Side
Hub
A.
Refrigerant Side
Air Side
--.--°F
B.
Delta T
--.--°F
C.
Target Delta T
D.
select tool
Return Dry Bulb
select tool
E.
select tool
Supply Dry Bulb
Return Wet Bulb
select tool
Supply Wet Bulb
A. Refrigerant Side Screen (tap or
E. Return Wet Bulb Temperature
swipe right to view)
F.
Return and Supply Calculations
B. Delta T
(tap to view)
C. Target Delta T (assumes
G. Supply Dry Bulb Temperature
400 CFM/ton)
H. Supply Wet Bulb Temperature
D. Return Dry Bulb Temperature
www.
.com
when probe is powered
when low battery.*
F.
G.
H.
I.
F.
G.
H.
information@itm.com
Publicidad
Tabla de contenido
