All Models - Lumex 7921R Serie Instrucciones De Montaje Y Operación

Attaching the Legs
7921R / 7921KD-1
fig. 1
1. Locate the seat frame (see fig. 1); place it upside down on a flat, dry surface.
2. Locate the legs (see fig. 2).
3. Attach the legs to the seat frame (see fig. 3). Depress the locking button at the top of
each leg and slide it into the seat frame until the button protrudes from the hole.
4. Repeat step 3 for each leg.
WARNING: Ensure legs are securely installed and all hardware is tight
before proceeding.
Attaching the Backrest: (Model 7921R and 7921KD Series Only)
1. Locate the backrest (see fig. 4).
2. Attach the backrest to the seat frame (see fig. 5). Depress the locking buttons and
slide the backrest onto the seat frame until the buttons protrude from the holes.
WARNING: Ensure backrest is securely installed and all hardware is
tight before proceeding.

All Models

WARNING: Ensure the Bath Seat is assembled as described. If the
Bath Seat is not properly assembled and installed, personal injury and
damage to the Bath Seat could result.
7921KD-1-INS-LAB-RevC14
7931R / 7931KD-1
fig. 4
fig. 2
fig. 5
fig. 3
2