Filling The Tank - Domair MASTERCOOL9 Instrucciones De Uso

FILLING THE TANK

ReMindeR: unPluG the aPPlianCe BeFoRe FillinG, seRViCinG oR othe-
Rwise handlinG it.
Refer to the drawings in the description
above.
iMPoRtant: when adding water to
the top tank, always make sure that the
maximum level is never exceeded by
monitoring the water level window.
1. Partly remove the tank from the unit.
2. For a cooler effect, place the freezer
blocks (not supplied) or ice cubes
in the tank before filling (important,
otherwise there is a risk of overflow).
3. Fill the tank.
4. Reposition the tank.
Rev 0-21 11 19
iMPoRtant:
- the water for refilling must always be
fresh and clean. never use anything
other than water.
- To avoid the risk of unpleasant
odours: empty the tank completely
and clean it at least once a week;
stop the humidifying function for
15 minutes before switching off the
ventilation.
- The water level should never be below
the «Min» level (risk of damage to the
pump), and never above the «Max»
level (risk of overflow).
- The freezer blocks should be placed in
the freezer before being used.
- never leave water in an appliance
which is not being used.
- In case of prolonged non-use, drain
the appliance completely (see para-
graph MaintenanCe). If this ins-
truction is not respected, the war-
ranty does not apply.
Fabriqué en Chine Page 25