822_949_207 AT230.book Seite 10 Donnerstag, 16. Februar 2006 5:43 17
g
example when toasting rye or dark
bread. When toasting only 1 slice and
also when toasting bread that is no
longer fresh, use a slightly lower
browning setting.
The electronic toasting time regulator
3
ensures that once a browning setting
has been chosen, the results are always
the same for the same type of bread.
Once you have finished toasting we
3
recommend always turning the rotary
knob for the browning setting to •.
This prevents the appliance being
switched on accidentally.
Stop Button
If you want to interrupt toasting, press
the stop button. The appliance
switches off.
Once chosen, the browning setting
remains unchanged.
Defrosting
When using frozen bread or rolls, set
the browning control to
depress the start lever. The toaster
defrosts the bread and then automati-
cally switches off.
Once the bread has defrosted, turn the
browning control to the browning set-
ting of your preference, as described
above, and depress the start lever
again.
10
Roll Rack (Figure 6/7)
0 Due to the nature of the function of
the appliance, the roll rack will become
hot during toasting, therefore never
touch the metal parts.
0 First, make sure the toaster is switched
off.
Gently squeeze the roll rack by the
hand grips, and push it onto the toa-
sting slot until it clicks in place.
0 Place rolls or other bread for crisping
on the rack, turn the browning control
to the required browning setting.
0 Switch on the toaster using the start
lever.
0 When the toaster has switched off,
turn the bread. Repeat the process.
Never place rolls or bread directly on
3
the toasting slot. Do not use the roll
rack as a carrying handle.
0 To remove the roll rack, first allow it to
cool down. Gently squeeze the roll rack
by the hand grips, and pull upwards to
and
remove.
Cleaning and Care (Figure 8)
0 Before cleaning, always unplug and
leave the toaster to cool down.
3
Crumbs dropping from the bread dur-
ing toasting collect in the crumb
drawer.
0 Pull out to the side and remove the
crumbs.
3
Do not use caustic or abrasive cleaners
to clean the thermally insulated outer
housing. Only clean the housing with a
dry or slightly moist cloth.
3
Liquid must not be applied to the
toaster, the toaster must also never be
immersed in liquid.