Ingersoll Rand PowerForce PF900 Manual De Operación Y Mantenimiento página 2

WARNING
Always wear eye protection
when operating or perform-
ing maintenance on this tool.
90 psig maximum at tool inlet.
•
Model
Pressure
PF900 91
Tested in accordance with PNEUROP PN8NTC1.2
H
♦ Tested in accordance with ISO8662- - 1
Low Power Erratic Action
X
X
X
WARNING SYMBOL IDENTIFICATION
Main Line(s) Inner Ø
to be 3X Size of
Air Tool's Inlet Ø
To Air
System
To Air
Tool
Emergency
Shut--Off
Valve
Lubricator Regulator
Drain Regularly
SPECIFICATIONS
HSound Level
♦Vibrations
dB (A)
Power
104
TROUBLESHOOTING
Blows Air /
Won't Run
X X
X X
WARNING
Read this manual before
operating tool.
LUBRICATION
Lubrication - - Inject approximately 1.5 cc of
•
Powerforce No. 50 Oil into the air inlet before
starting the tool and after each two or three hours
of operation, unless the air line lubricator is used.
Lubricate with 1.5 cc of Powerforce No. 50 Oil
before storage.
INSTALLATION
Branch Line(s) Inner Ø
to be 2X Size of
Air Tool's Inlet Ø
R
L
F
Filter
FRL
Compressor
(Dwg. TPD905- -2)
Inlet
Level Connection
2
m/s Thread Type
5.2 1/4" NPT
Too Noisy Causes and Solutions
Check air pressure.
X Check for water in lines.
X Oil tool with air tool oil.
2
WARNING
Always wear hearing
protection when operating
this tool.
Minimum
Inside Ø
Air Hose
Inches (mm)
1/4 (6.35)