•
SPECIAL REGULATIONS
a.
Only use gloves that are permited for use in refrigeration processes
b.
Observe the safety regulations for cooling units
c.
Skin must not come into contact with the freezer forms whilst the unit is in use, it
would burn the skin
d.
On completion of the work, it is extremely important to first allow the freezer
forms and the pipes to defrost before dissembling them and storing them in the unit
e.
Under no conditions should the coolant pipes be bent of forced during use or
storage. This will prevent them from cracking and losing coolant
f.
If any coolant leaks out of the unit and comes into contact with the eyes, wash
inmediatly with plenty of water. If inhaled, go outside inmediatly into the fresh air. If
comes into contact with the skin or enters the body via the mouth, wash inmediatly
the affected zone