Bluetooth Connection; Battery Installation - Sharp Mono DR-P350 Manual De Usuario

Accessories
1x Digital radio player
1x User manual
1x AC adaptor
Panels/Controls
See pictures on the fi rst page.
Picture 1 - FRONT PANEL:
1. NEXT STATION (PRESET+) – Press to skip to the next preset radio
station.
2. PREVIOUS STATION (PRESET-) – Press to return to the previous preset
radio station.
3. EARPHONE (input)
4. DISPLAY SCREEN
5. TUNING – Press to fi ne tune (decrease) frequency; Press and hold
to decrease the frequency continuously.
6. TUNING – Press to fi ne tune (increase) frequency; Press and hold
to increase the frequency continuously.
7. INFO – Press to show the diff erent radio station information.
8. MENU – Press to enter or exit the menu.
9. PRESET PROG – Press to enter the preset recall; Press and hold to
enter the preset store.
10. PLAY/PAUSE/ENTER/AUTO SCAN – Press to confi rm a selection; Press
and hold to do auto scanning the radio station.
Press to temporarily pause a playback, Press it again to resume the
playback in bluetooth mode.*
Press and hold to disconnect the bluetooth connection in bluetooth
connection status.*
11. VOLUME/POWER ON/OFF/SOURCE – Press to switch on the unit;
Press and hold to switch off the unit.
Press to switch among in DAB, FM tuner and BLUETOOTH mode* in
power on status.
Turn the volume knob to turn up or turn down the volume.
12. DIGIT BUTTON (1/2/3/4) – Press to select the corresponding digit
preset radio station.
13. HAND SHANK
Picture 2 - REAR PANEL:
1. FM ANTENNA
2. DC IN SOCKET
* - only for model DR-P355
WARNING: Excessive sound pressure from earphones
or headphones can cause hearing loss.

Battery installation

1. Remove the battery compartment cover on the rear panel of the unit.
2. Load 4 X R14 / C CELL / UM2 batteries into the battery (not included)
compartment making sure that the battery have been inserted with
the correct polarities matching the symbols +, - as indicated inside the
battery compartment.
3. Replace the cover.
NOTE:
– Remove the battery when you do not intend to use the unit for a long
time.
– Weak battery can leak and severely damage the unit.
– The battery must not be exposed to excessive heat source, such as
sunshine, fi re or any other things like that.
– Be environmentally friendly and dispose of batteries according to your
government regulations.

Bluetooth connection*

The bluetooth pairing name of the player is Stereo DR-P355, press
[SOURCE] button to switch to the corresponding Bluetooth signal source,
use your smart phone to search the bluetooth signal of the player, input
the password 0000 if required password , at this time, "Not Connected"
will be fl ashing on the display screen . The player will synchronize to play
songs on your smart phone while the "Bluetooth Connected" keep solid
on the display screen mean to be connected successfully.
Disconnect the bluetooth on the smart phone to switch off the bluetooth
connect.
The bluetooth is connected to your smartphone successfully for the fi rst
time, disconnect the bluetooth on your smart phone then reconnected
it, the player will memories your smart phone and repaired automatically.
Press [PLAY/PAUSE] to resume the playback.
* - only for model DR-P355
FM tuner Operation
1. Power on the unit, press [SOURCE] repeatedly to select FM tuner
mode.
2. Select a desired radio station by pressing the PRESET
button repeatedly.
3. To automatically search for the next/previous available radio station,
press and hold for 3 seconds the TUNING
FM Menu
Press the MENU button while in FM mode to enter the FM menu. Inside
the menu you can select between the following menu items and functions
by pressing the TUNING / - buttons (to enter menu items and to
confi rm a selection, press the /
menu press the MENU button):
[Scan setting]: Select the scan sensitivity(strong station only or all station)
[System]:The system menu included sleep, Alarm, Time, Back light,
Language, Factory Reset and SW version option.
Sleep: The sleep function enables you to set a timerafter which the unit
will turn itself into standby mode automatically. The sleep time included
Sleep off /15 /30/45/60/90minutes option, To cancel the sleep function,
select the Sleep off option.
Alarm: The alarm timer setting include Alarm 1 setup and Alarm 2 setup.
– The Alarm 1 setup part: Alarm 1 wizard On time -Duration-Source-Daily-
Volume-Alarm on/off .
– The Alarm 2 setup part: Alarm 2 wizard On time -Duration-Source-Daily-
Volume-Alarm on/off .
Time: The Time setting include set Time/Date ,Auto update, Set 12/24 hour
and Set date format option, you can select these relevant option to set.
Backlight: The Backlight consist of three option: Timeout, On level and
Dim level option, these option can be used to set desired Backlight eff ect.
Language: set the diff erent language.
Factory Reset: reset the unit (No/Yes).
SW version: View software version.
FM tuner Operation
Manually Store Radio Stations
This unit enables you to store up to 20 radio stations:
1. Tune to a radio station which you would like to store.
2. Press and hold for 2 seconds the
"Preset Store".
3. Select a desired preset (1 - 20) on which you want to store the current
frequency by pressing the TUNING
4. Press the / button to confi rm your setting. "STORED" will be
shown on the display.
5. To recall a stored frequency, press NEXT/PREVIOUS buttons until you
reach the desired preset. Alternatively you can press the
select the desired preset using the TUNING
ing the selected preset by pressing the /
EN
or PRESET
or button.
button; to exit menu items and the
button. The display will show
or button.
button,
/ buttons and play-
button.