Black and Decker Price Pfister Harbor 36-CL Serie Manual Del Usuario página 2

Thank you for purchasing this Price Pfi ster Kitchen Faucet. All Price Pfi ster products are carefully engineered and factory tested to provide long
trouble-free use under normal conditions. This Kitchen Faucet is easy to install using basic tools and our easy to follow illustrated instructions.
If you have any questions regarding your Kitchen Faucet installation, call 1-800-Pfaucet (1-800-732-8238).
1 BEFORE PROCEEDING
Read all the instructions completely before proceeding.
WARNING:
Price Pfi ster recommends calling a professional if you are uncertain about
installing this product!
This product should be installed in accordance with all local and state plumbing and
building codes.
2
2 SHUT OFF WATER SUPPLY
Locate water supply inlets and shut off the water supply valves. These are
usually found under the sink or near the water meter. If you are replacing an
existing faucet, remove the faucet from the sink and clean the sink surface
thoroughly.
3
3 TOOLS RECOMMENDED
• PTFE plumber's tape or thread sealant
• Slotted screwdriver • Phillips head screwdriver
• Adjustable wrench • Flashlight
Your installation may require supply lines and/or shut-off valves, cone washers,
friction rings, or other additional tools. Consult the store where your faucet was
purchased for recommended connections that may be required for you area.
ENGLISH
• Plumber's putty
• Pliers
• Cloth
2
FAUCET INSTALLATION STEPS
4
4 CONNECTING HOSE GUIDE
Apply a small bead of plumber's putty (make sure you follow man u fac tur er's
recommendations on use) to bottom inside edge of Hose Guide (4A). Mount
Hose Guide (4A) in far right hole in sink.
5
5 SECURING HOSE GUIDE
Secure Hose Guide using Locknut (5A). Hand tighten.
4A
5A