Publicidad
Idiomas disponibles
Idiomas disponibles
1. Technical Data
Line voltage: 230 Volt/50 Hz (if not stated otherwise on the ID-label).
Luminaires: 120 x 1 watt Power LED (72 x 10,000 Kelvin + 48 x blue)
The splash proof housing (IP 55) is made of saltwater-resistant anodized aluminium.
Dimensions: 67 cm x 30,5 cm x 9,5 cm.
2. Unpacking
On unpacking, please check the lighting system immediately for any damages. In case of any
complaints, please contact your dealer directly.
Included in shipment:
aquaspaceLED
•
steel cable suspension
•
3. Safety advices
The lighting system cannot be used as aquarium cover. It has to be mounted only above the
•
aquarium. The minimum distance between lighting and aquarium must be at least 30 cm.
The housing and protection glasses may become hot during operation. Be cautious when
•
touching them!
Before any replacement of bulbs, disconnect the lighting system from the mains and let it cool
•
down. Afterwards, take the lighting down.
When cleaning, take care that no humidity enters the interior of the lighting system!
•
Pay attention to a sufficient thermal exchange. Keep the ventilation slits always free! Do not
•
mount the system in enclosures or behind panels. Missing aeration may result in overheating
and damage the electrical components what may be the cause of noise production.
Do not try to repair the lighting system (LEDs, electronical parts). Please send it in for checking,
•
preferably with a list of defects.
When working on the light, always pull all power plugs.
•
4. Installation
The light can be fastened on the aquarium edge with the steel cable at the ceiling.
Suspension by using the steel cable
The cable suspension system provides a neat and simple method of ceiling mounting of
aquaspaceLED and other suitable lights.
Contents:
The suspension system comprises 2 pcs. of each of the following:
1. Ceiling plate with screws and plugs, 2 metre stainless steel cable with stopper
2. Light fixing (cable with Y-piece, end bushes and screws)
6
Publicidad
