Publicidad
Idiomas disponibles
Idiomas disponibles
Part tWo: apply armrest and Backrest support bars
1
1 Continued
2
Step 1: attach the armrest support bars (e).
Keep the bench flipped over so the assembled legs are facing upwards. Take the armrest support handle (E) and insert longer
tube portion into support frames as pictured above. Depress the push-button on the armrest support bar (E) to lock into place.
Make sure the push-button is fully protruded before using. Repeat this step with the remaining three armrest support bars (E).
Step 2: attach backrest extension bars (i) to the backrest support bar (H) (for MDS89745ELMB only).
Next take one of the backrest extension bars (I) and insert the tube into the backrest support bar (H) which was already
screwed into the underside of the seat in Part one: Step 3. Make sure the push-button is fully protruded before using.
Repeat this step with other backrest extension bar (I).
Part tHree: apply armrest Handles (f) and Backrest (G)
1
2
3
3 Continued
Step 1: flip the Shower chair upright.
Place shower chair or bench right side up to assemble armrest handles (F) and the backrest (G).
NOTE*** Ensure all four legs are adjusted evenly and are free of any obstructions prior to use***.
Step 2: insert armrest handles (f) into the armrest support bars (e).
Depress the push- buttons down on both sides of the armrest handles (F) while inserting into the armrest support bar (E).
Make sure push-buttons on both sides are fully protruded and secure before using. Repeat this step with remaining armrest
handle (F) on other side.
(Assembly for Model mdS89740eLmB is now complete)
(Continue to next step for mdS89745eLmB- Tub and Shower chair- with backrest)
GPI141-IM28 (MDS89740ELMB)
5
Rev: 3/2/2015
Publicidad
