Care And Maintenance - Holiday living 151-131500020-0 Manual Del Usuario

BATTERY INSTALLATION INSTRUCTIONS
In order for the light set to operate, batteries must be installed. See steps outlined below.
1. Loosen the screw on the battery
box with a Phillips screwdriver (not included).
3. Insert three AA batteries (not included). Make
sure the batteries are placed in the correct
direction according to the polarity markings inside
the battery box.

CARE AND MAINTENANCE

USE AND CARE INSTRUCTIONS

When placing on a live tree, keep the tree well-maintained, fresh, well-secured, and stable. Do
not place on live trees in which the needles are brown or break off easily. Keep the tree holder
filled with water.
 Before using or reusing, inspect product carefully. Discard any products that have cut, damaged,
or frayed wire insulation or cords, cracks in the lamp holders or enclosures, loose connections, or
exposed copper wire.
 When storing the product, carefully remove the product from wherever you place it, including
trees, branches, or bushes, to avoid any undue strain or stress on the product conductors,
connections and wires.
 Store neatly in a cool, dry location protected from sunlight.
 The LED lamp has polarity. Do not deliberately change the direction of the LED lamp in the lamp holder.
REPLACING BULBS FROM LAMP HOLDERS
1) Switch off the product.
2) Unlock the burned out LED lamp and pull lamp and plastic base straight out of lamp holder as
shown in Fig. 1.
3) Insert the spare LED lamp into the lamp holder in correct direction and lock the hook of lamp
base as shown in Fig. 2.
4) Replace lamp with only 3.4 volt (LED) spare lamps provided with this product.
2. Gently slide open the battery box
cover.
4. Re-attach the battery box cover
and tighten the screw back down
on the battery box.
3
3