Tabla de contenido
Publicidad
Enlaces rápidos
Publicidad
Tabla de contenido
Resumen de contenidos para Arris VIP2502W
- Página 1 VIP2502W Wireless IPTV Receiver Installation Guide 593728-001-c 03/2014...
-
Página 2: Important Safety Instructions
VIP2502W Wireless IPTV Receiver Installation Guide... - Página 3 Do not place it in a sealed enclosure without providing for adequate airflow. • Use only the power adapter and cord supplied to connect the VIP2502W to your home AC power outlet. • Do not plug the AC power adapter into a switched power outlet.
-
Página 4: Tabla De Contenido
Troubleshooting ......... . 11 VIP2502W Wireless IPTV Receiver Installation Guide... -
Página 5: Introduction
Introduction Congratulations on choosing the ARRIS VIP2502W Wireless IPTV Receiver. The VIP2502W provides these extraordinary home entertainment features: • Wireless input via the VAP2500 Wireless Access Point lets you easily position or move your video entertainment system anywhere in your residence -- or even outside -- without network wires or cables •... -
Página 6: Overview
Lights green when receiving a video stream Lights blue when receiving video resolution of 720p or 1080i RECORD Lights red when a recording is in progress MENU Displays the VIP2502W menu on your TV screen Up/Down Changes the channel (channel up/channel down) arrow keys Left/Right... -
Página 7: Rear Panel
Overview Rear Panel The VIP2502W rear panel features are described in the following table. Item Function OPTICAL Toslink (S/PDIF) digital audio output NETWORK Ethernet 10/100Base-T RJ-45 port RCA component video outputs to an HDTV VIDEO OUT RCA standard-definition composite video output to a TV,... -
Página 8: Wireless Connection
8. An icon appears on the screen, indicating that the connection sequence is in process. When three horizontal dots appear, the connection has been successful. 9. On the front panel of the VIP2502W, two or more bars on the signal strength indicator should light green. You have now established a secure wireless connection between the Access Point and your VIP2502W. -
Página 9: Connecting Your Tv Receiver
Connecting Your TV Receiver This section describes alternative methods for connecting the VIP2502W to your home entertainment system. Instructions and diagrams are included for connections to: • High-Definition TV (HDTV) • Home Theater Receiver–Audio • Stereo TV Before you move or change components on your entertainment system, always disconnect power from the wireless receiver. -
Página 10: Common Cabling Examples
AUDIO L and R connections. Common Cabling Examples The following cabling diagrams illustrate common sample audio/video (A/V) connections. When connecting other components to your TV Receiver, refer to the other component installation manuals for additional connection information. VIP2502W Wireless IPTV Receiver Installation Guide... -
Página 11: Connecting To An Hdtv - Video Only
DVI and component video carry video signals only. To connect the audio, refer to the following page. To connect to a home theater receiver, refer to “Connecting Audio to a Home Theater Receiver – Audio Only. ” VIP2502W Wireless IPTV Receiver Installation Guide... -
Página 12: Connecting To An Hdtv - Audio Only
OUT L and R connectors. In most cases, S/PDIF offers better audio quality, including support for Dolby Digital 5.1 Surround Sound. HDMI carries video and audio. If you connect your HDTV using HDMI, no additional audio connections to the TV are necessary. VIP2502W Wireless IPTV Receiver Installation Guide... -
Página 13: Connecting Audio To A Home Theater Receiver
If your home theater receiver supports it, use the OPTICAL S/PDIF output. Otherwise, use the AUDIO OUT L and R connectors. In most cases, S/PDIF offers better audio quality, including support for Dolby Digital 5.1 Surround Sound. VIP2502W Wireless IPTV Receiver Installation Guide... -
Página 14: Connecting To A Stereo Tv
+12V DC Sample stereoTV INPUT S-VIDEO VIDEO AUDIO LEFT CABLE/ ANTENNA IN AUDIO RIGHT This video connection method does not support HD video. For more information, see “Connecting an HDTV – Video Only. ” VIP2502W Wireless IPTV Receiver Installation Guide... -
Página 15: Troubleshooting
• One or two bar segments lit red: Signal is very weak. Video is affected. • No bar segments lit: No wireless connectivity. If signal strength is inadequate, try reorienting or relocating the Wireless TV receiver or the Access Point for improved reception. VIP2502W Wireless IPTV Receiver Installation Guide... -
Página 16: Regulatory Information
The band from 5600-5650MHz will be disabled by the software during the manufacturing and cannot be changed by the end user. This device meets all the other requirements specified in Part 15E, Section 15.407 of the FCC Rules. VIP2502W Wireless IPTV Receiver Installation Guide... - Página 17 The Wireless Fidelity (WiFi) certification as defined by the Wi-Fi Alliance. Wireless LAN and your Health The VIP2502W, like other radio devices, emit radio frequency electromagnetic energy, but operate within the guidelines found in radio frequency safety standards and recommendations.
-
Página 18: Software License
Software. The Software is never sold. ARRIS licenses the Software to the original customer and to any subsequent licensee for personal use only on the terms of this License. ARRIS and its third party licensors retain the ownership of the Software. - Página 19 Open Source Attributions ARRIS IPTV Set-top Model VIP2502 For instructions on how to obtain a copy of any source code being made publicly available by ARRIS related to software used in this ARRIS product you may send your request in writing to: ARRIS Enterprises, Inc.
- Página 20 Copyright © 2014 ARRIS Enterprises, Inc. All rights reserved. No part of this publication may be reproduced in any form or by any means or used to make any derivative work (such as translation, transformation, or adaptation) without written permission from ARRIS Enterprises, Inc.