Manuales relacionados para Sanus accents AASP1
Resumen de contenidos para Sanus accents AASP1
- Página 1 NOTE to Installer: Please leave this manual with the homeowner AASP 1 INSTRUCTION MANUAL We’ll Make It Stress-Free If you have any questions along the way, just give us a call. 1-800-359-5520. We’re ready to help!
- Página 2 IMPORTANT SAFETY INSTRUCTIONS – SAVE THESE INSTRUCTIONS – PLEASE READ ENTIRE MANUAL PRIOR TO USE Before getting started, let’s make sure this accessory is perfect for you! Do not exceed 3 lbs. (1.3 kg) of accessories for the AASP1 panel. Weight Limit 3 lbs.
- Página 3 Dimensions in. [mm] 8.39in. 5.38in. [213.2mm] [136.62mm] ø0.33in. [8.40mm] 5.48in. 6.13in. 5.29in. [139.07mm] [155.6mm] [134.48mm] ø0.20in. [5.20mm] 0.78in. [19.69mm] 6.28in. [159.5mm] 0.38in. [9.5mm]...
- Página 4 Parts and Hardware WARNING: This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer; contact Customer Service. Never use damaged parts! NOTE: Not all parts and hardware included will be used.
- Página 5 Parts and Hardware Included Retaining Screw Mounting Screws TV Screws Washers M4 X 35 mm M4 X 12 mm M4 X 6 mm M6 X 35 mm M6 X 12 mm M8 X 35 mm M8 X 20 mm Spacers 22 mm...
- Página 6 Determine the Mounting Method for Your AASP1 Panel For TV Mounts with side slots For TV Mounts without For non-mounted TVs side slots (TVs with stands) Go to STEP 1, OPTION A Go to STEP 1, OPTION B Go to STEP 1, OPTION C...
- Página 7 STEP 1 Option A Attach to a Wall Mount WITH Slots Before installing panel , install the TV brackets onto the TV. If the TV is already mounted to the wall, you may need to remove it for better access. Refer to your TV mount’s installation manual for TV bracket assembly or TV removal. Attach panel on either TV bracket fi...
- Página 8 STEP 1 Option B Attach to a Wall Mount WITHOUT Slots Before installing panel 1. R emove the TV from the wall plate or arm assembly 2. R emove the TV bracket from the TV (if installed). (if mounted). NOTE: Remember the locations of all the hardware AND the TV Refer to your TV mount’s installation manual for TV removal.
- Página 9 NOTE: You may need to verify clearance with your mount’s arm assembly or wall plate before installing. CAUTION: Verify adequate thread engagement with the screw, washer and AASP1 panel Too short will not hold the panel. Too long will damage the TV. Too Short...
- Página 10 Attach panel using your TV mount’s hardware (screws/washers/spacers). CAUTION: Panel must touch TV bracket . Any spacers/adapters must be With Spacers mounted on the TV side. CAUTION: Avoid potential personal injuries and property damage! You may require longer screws for this step - - verify adequate thread engagement (PAGE 9). Additional screw lengths and spacers are provided if required.
- Página 11 STEP 1 Option C Attach to Non-Mounted TVs (TVs with stands) Acceptance Equation: To determine if the AASP1 will work for your TV: Divide This Weight of TV answer must answer multiplied by the greater than Width of stand Distance between holes...
- Página 12 Attach panel to the back of the TV directly into one of the TV’s VESA mounting holes using a mounting screw and washer in one of the round holes of panel as shown. NOTE: Install device before mounting panel to TV. NOTE: DO NOT install more than two panels.
- Página 13 STEP 2 Attach Accessories to the Panel 1. Position a strap into a slot BELOW your accessory and rotate 90 degrees. NOTE: Install device before mounting panel to TV.
- Página 14 2. Wrap the strap over the accessory and through panel NOTE: for heavier or larger-sized accessories, use two to secure in place. straps to secure in place. IMPORTANT: Make sure there is enough strap overlap to secure the accessory in place.
-
Página 15: Mounting Examples
Mounting Examples Overhang Vertical Angled... - Página 16 CONSERVE ESTAS INSTRUCCIONES DE SEGURIDAD IMPORTANTES Y LEA TODO EL MANUAL ANTES DE UTILIZAR ESTE PRODUCTO Antes de comenzar, verifi quemos que este accesorio es el adecuado para usted. Límite de peso 1,3 kg No exceda los 1,3 kg (3 lb) de accesorios con el panel AASP1. para el AASP1 (3 lb) PRECAUCIÓN: Evite posibles lesiones personales y daños materiales.
- Página 17 Nunca utilice piezas deterioradas. NOTA: No todos los accesorios incluidos deberán utilizarse. Determinar el método de montaje para su Panel AASP1 VER PÁGINA 6...
- Página 18 NOTA: Puede que necesite verifi car la separación con el módulo del brazo del soporte o placa de pared antes de su instalación. NOTA: NO instale más de 2 paneles a la vez. PRECAUCIÓN: Verifique que el tornillo, la arandela y el panel de AASP1 enrosquen correctamente.
- Página 19 4. Acople el panel utilizando el hardware del soporte del televisor (tornillos/arandelas/separadores). ESPAÑOL PRECAUCIÓN: El panel debe hacer contacto con el soporte del televisor . Cualquier separador/adaptador debe montarse en el lado del televisor. PRECAUCIÓN: Evite posibles lesiones personales y daños materiales. Es posible que necesite tornillos más largos para este paso: verifi que cuál es el enrosque adecuado (PÁGINA 9).
- Página 20 Thank you for choosing Sanus Accents! Please take a moment to let us know how we did: Call us: 1-800-359-5520 Email us: info@sanus.com Leave a review: accents.sanus.com Milestone AV Technologies and its affi liated corporations and subsidiaries (collectively, “Milestone”), intend to make this manual accurate and complete. However, Milestone makes no claim that the information contained herein covers all details, conditions, or variations.