Whirlpool WTW7120HC Manual De Instrucciones página 23

If the Washer Fails an Over the Air Update (OTA)
The washer software can be updated remotely through Wi-Fi with an OTA
update. If the internet connection is lost during this process, the update may
be incomplete.
1. Remove the console to access the ACU and HMI.
2. Does the ACU and HMI have green status LEDs on?
➢ If the machine is powered and the status LEDs are off, the OTA update
may have failed. Go to step 3.
➢ If the status LEDs are on, the machine should the software update was
successful.
3. Request an OTA update through the mobile app.
Control Panel Indicator Lights for Connected Washer
LED Icon
Wi-Fi Connect
Wi-Fi Connect
Wi-Fi Connect
Remote Start
Remote Start
DO NOT REMOVE OR DESTROY
FOR SERVICE TECHNICIAN'S USE ONLY
LED Status:
• Connection not made to home router or access point (AP). This will occur when washer is not
claimed and not commanded to be claimed, as well as when Wi-Fi has been turned off.
OFF
-OR-
• Washer in standby mode.
ON • Connection made to home router or access point (AP).
Progressing • Connecting to home router or access point (AP).
OFF • Remote control functionality is off.
ON • Remote control functionality is on.
Replacement Procedure – Wi-Fi Module
The replacement of an HMI will include a new Wi-Fi module will have a new
Smart Appliance ID (SAID). A new label will be included for the technician to
place on the washer over the original label. Claiming will have to be repeated
as explained in "Claiming the Washer" as well as in the Use and Care Guide.
Detailed instructions will also be included with the replacement part.
Indication
23