Technical Parameters - Saivod FHS 2012 Manual De Usuario

Fill water, ice full LEDs
are lit together
Ice making in poor
condition
Unusual noise
IX .CLEAN AND STOP USE VIII IX X
1. Be sure to unplug the power plug before cleaning and a long time
standby.
2. Clean or wipe the outer surface of the product with a soft cloth.
3. Water tank cleaning.
1). Unscrew the nut of water outlet, Release out of the ice water.
2). Pour clean water into the water tank, use a clean cloth to wipe
water tank room around, till ice water drain outlet release all of the
water, tighten the nut, pay attention to
grip the nut.
4. Do not use organic solvents, boiling water, cleaning agents, strong
acids, strong acid and Alkaline etc substances for cleaning;
5. If ice machine will standby for a long time, you should
unplug the power cord, put the ice water system deam
and dry with a dean doth,place in a dean place to storage.
X. TECHNICAL PARAMETERS
Model No.:
30
FHS 2012.indd 30
Ice making box 1. Check whether there have objects stuck
reset in bad in the ice box
condition 2. The internal parts wear, send to
professional service maintenance
department
1. Poor heat 1. Clean the dust of cooling fans and in come
dissipation &out come gates of wind
2. Water for 2. Pour into the ice making water at room
ice making temperature
temperature is 3. Do not put the machine into environment
too high at high temperature
3. The ambient 4. Cooling system failure, send to
temperature is professional service department to
too high maintenance
4. Leakage of
refrigerant
Wear of a fan or 1. Ensure proper placement
pump 2. Send to professional service department to
maintenance
FHS2012
sealed with the plug.before
4/18/2016 4:51:17 PM