Weather Band Operation - Jensen JHD40BT Manual De La Instalación Y Operación

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

JHD40BT

WEATHER BAND OPERATION

Accessing the Weather Band
Press the MODE button (4) to access the weather band mode.
What is the NOAA Weather Radio?
NOAA is a nationwide system that broadcasts local weather emergency information 24 hours a
day. The U.S. network has more than 530 stations covering the 50 states, as well as the
adjacent coastal waters, Puerto Rico, the U.S. Virgin Islands and the U.S. Pacific Territories.
Each local area has its own transmitting station and there are a total of seven broadcasting
frequencies used: 162.400MHz (CH2), 162.425MHz (CH4), 162.450MHz (CH5), 162.475MHz
(CH3), 162.500MHz (CH6), 162.525MHz (CH7) and 162.550MHz (CH1).
How many stations can I expect to receive?
Since the broadcasts pertain to local weather and information, the transmission power is
usually very low (much less than AM or FM stations) which means you will usually receive only
one station unless you are on the edge of two or more broadcast signals. The most you will
receive is two or three, and that is rare.
Is it possible I won't receive any stations?
Depending on location, it's possible to receive a very weak signal or none at all. Also, similar to
AM and FM signals, weather band signals are subject to surrounding conditions, weather,
obstructions of the signal by hills or mountains, etc. If no NOAA signals are found/received,
the tuner will scan all seven NOAA frequencies every 30 seconds.
How will I know I am tuned to the weather band?
When you select the weather band, the "WB" icon will appear on the display panel, along with
the current channel indication. Press the SEEK/TUNE/TRK |<< or >>| buttons (13, 14) to tune
to each of the seven channels until you find the weather band station broadcasting in your
area.
NOAA Weather Alert
The Weather Alert function adds an additional level of user safety by automatically switching
from the current function mode to weather band mode for a minimum of 120 seconds if a
NOAA warning tone (1050 Hz) is received/detected. If no additional warning tone is received
for 60 seconds, the unit will switch back to the last known function mode.
The Weather Alert function can be turned "on" or "off" by the Audio/Menu key, as described on
page three. When "ON", the weather tuner remains active, even when the radio is turned off
(as long as the power is still applied to the radio). If a weather alert is issued, the radio will turn
on and play the announcement for 60 seconds, then turn back off and revert to weather alert
monitor mode.
The radio will not respond to any weather alerts when it is off and will not automatically switch
to the weather band if an alert is issued.
NOTE: If the unit is programmed for European operation, the WB function will be
disabled.
8

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Heavy duty jhd40bt

Tabla de contenido