Introduction; Easy To Use - Work Pro W D 40 K3 Instrucciones De Usuario

EN
EN

1. Introduction

The present document pretends to make a description of ther menus in the displays, with the
objective to transmit the operation. Moreover its show the technical features.

2. Easy to use

• DMX 512 signal control
• 0/+10V Analogic control(Allows to operate with DMX simultaneous)
•
Individual patching possibility over each input channel
• LED indicator per channel for output level
Power supply LED indicator
•
DMX input signal LED indicator
•
• Microprocessed temperature control.
• DMX buffer against lost of connection
• Programmable protection against strong variations on output level.
• Synchronization with the microprocessed, allowing to detect and filter noises of power supply.
• 16x2 characters display for general information and control menus.
• 4 buttons for menus, 1 reset control and button for channel.
• Response curves. Linear, Quadratic. Quadratic inverse, on/off.
Preheat level for all channels
•
Automatic Frequency Auto-adjust between 47 and 63 Hz.
•
Slow start with 4 seconds flange, allowing to start the dimmer with complete load.
•
Micropocessed refrigeration by forced air.
•
16A /230V (1P + N) MCB per channel
•
Monophasic, Triphasic operation, with one phase emergency operation.
•
Double 16A schucko connection per output
•
Power device: 41A Triac per channel
•
0/100% Duty cycle.
•
• Easy use by MENUS
• Programs memories
Possibility of 3 programs of 64 chases each one.
Programation possibility by chases, with time between chases and pauses.
• Informative viewer
Allow to view in the display the more significative parameters and the power supply
Frequency on real time
D 40 K3
User Manual/Manual de uso
,
PAG. 2