CASUALPLAY KUDU 4 Instrucciones página 22

WARNING: EXTRACT THE UNISYSTEM ADAPTORS BEFORE INSTALLING THE
SEAT.
Fitting the armrest (diagrams 9-10)
• Insert the ends of the armrest into the front slots of the pushchair (fig.9).
• To remove the armrest, press the buttons on the sides and pull the armrest upwards
(fig.10).
Adjusting the armrest (diagram 11)
• Press the side buttons on the inside of the armrest, and pull the armrest backwards or
forwards to the required position (fig. 11).
• The armrest has a position while in use. It will click when correctly in place.
Changing the direction the seat faces (diagrams 12-13)
WARNING: NEVER ADJUST THE SEAT (CHANGING THE DIRECTION IT FACES AND
FITTING OR REMOVING IT) WHILE THE CHILD IS SITTING IN IT.
• Put the parking brake on.
• Press the buttons on both sides of the seat. Next, pull the seat upwards (fig. 12).
• Install the seat in the required position, when correctly fitted it will click into place (fig.
13).
• The child can now sit in the seat.
Adjusting the footrest (diagram 14)
• The angle of the footrest can be adjusted for the child's comfort.
• Hold both ends of the footrest and raise it to the required position
• Press the buttons on the sides and lower the footrest to the required position.
Adjusting the handlebar (diagram 15)
• The handlebar has 3 positions. To select one of the positions press the button in the
middle of the handlebar, and place it in the correct position.
Adjusting the safety harness (diagram 16)
• Put the parking brake on and check that the safety harness is unfastened before seating
the child.
• Position the child in the seat and fasten all the parts of the fastening buckle: chest
20