Fan Assembly; Motor Housing Assembly - Litex WC42BNK5 Guia De Instalacion

6. Fan Assembly.

Remove motor assembly from j-hook on
hanging bracket. Lift motor assembly to
hanging bracket and carefully push wiring
and wire connectors into outlet box. Align
holes in top of motor assembly with bolts
in hanging bracket and push up so that
bolts come through holes. Secure motor
assembly with flat washers and motor
mounting nuts that were previously
removed (refer to page 3, Section 4).

7. Motor Housing Assembly.

Temporarily raise motor housing to
hanging bracket to determine which 2
screws in hanging bracket align with
slotted holes on top rim of motor housing.
Partially loosen the 2 screws in the hanging
bracket that correspond to slotted holes in
the motor housing. Remove the other 2
screws from the hanging bracket.
Now, raise motor housing to hanging
bracket again, allowing slotted holes in
motor housing to align with loosened
screws in hanging bracket. Twist motor
housing to lock. Re-insert the 2 screws that
were previously removed and then tighten
all screws to secure motor housing.
j-hook
motor
mounting
nuts and
flat washers
motor assembly
motor
housing
screws
motor
housing
page 5
hanging
bracket
motor
mounting
nuts and flat
washers
hanging
bracket
motor
housing
screws