ENGLISH
USING OTHER DJ-SOFTWARE
Since this controller is designed as a MIDI-compatible device, you can use it to control any Midi DJ-software.
Of course this means that you will need special MIDI-mapping files for these products. Please check our
website (www.jbsystems.be): we will provide MIDI-mapping files for some other DJ-software free of charge.
VIRTUALDJ TUTORIALS
In the next chapter we give you a brief overview of the functions in VirtualDJ LE that comes with your
controller. VirtualDJ is a very intuitive program so you will easily learn it while trying all possibilities. If you
want to learn more, please check the VirtualDJ website for video tutorials and extra user guides:
www.virtualdj.com/wiki/index.html .
FUNCTIONS (MIXER)
1. TRACK SELECT knob: turn this knob to scroll up or down in the
folders, browser or music library.
Press shortly: to select the folder or file.
Press for 0,5sec: to enlarge/shrink (zoom) the browser.
2. LOAD A button: press this button to load the selected track to
player A (left side) of the software.
3. LOAD B button: press this button to load the selected track to
player B (right side) of the software.
4. BACK button: this button allows you to return to a higher level in
the folder/browser structure.
5. GAIN knob: turn this knob to adjust the gain of the corresponding
channel.
6. HIGH knob: used to adjust the high frequencies of the
corresponding channel.
7. MIDDLE knob: used to adjust the middle frequencies of the
corresponding channel
8. LOW knob: used to adjust the low frequencies of the corresponding
channel.
9. CHANNEL FADER: adjusts the volume of the corresponding audio
channel.
10. MIC VOLUME: used to adjust the sensitivity of the DJ-microphone.
11. MIC INPUT: you can chose the small 3.5mm or big 6.3mm input jack
to connect your DJ microphone.
12. CROSSFADER: with this fader you can mix over between both
channels. The crossfader only works when you move the channel
faders (9) of both channels to the desired level!
13. CUE MIX: With this knob you can mix the input channels to the headphone output:
Put the knob in the extreme left position to hear the PFL signals of the players.
Put the knob in the extreme right position to hear the mixed master output signal.
Put the knob in any other position to hear a mix of the two signals.
This option makes it possible to check your mix before you put it on the master output.
14. CUE VOLUME knob: used to control the output level of the headphone channel.
15. PHONES OUTPUT: connect your headphones here for monitoring of your tracks.
16. CUE SELECT button left: press this button to monitor player1 while the channel fader is closed.
17. CUE SELECT button right: press this button to monitor player2 while the channel fader is closed.
18. MASTER VOL knob: used to set the volume of the master output.
®
JB SYSTEMS
5/50
USER MANUAL
DJ-KONTROL 2