Product Characteristics - EDM Product 07182 Instrucciones De Uso

07182-07183
REF.
CAUTION
Some parts of the heater can get very hot and cause burns. Do not touch hot surfaces. Special atten-
tion should be paid where children and vulnerable people are present.
NOTE
These heaters are intended for household use only. They can be used as portable appliances and
wall-mount appliances.

PRODUCT CHARACTERISTICS

1. Elegant black glass panel.
2. High-quality aluminum heating element: fast heating with higher energy savings.
3. Touch screen control and remote control.
4. Digital display with room temperature control.
5. For wall mounting or floor standing.
INSTALLATION
While used on the floor it becomes a portable convector - without carrying handle). For this you have
to fix the base / feet in the heater housing with the supplied ST12X4mm screws (8 pieces).
WALL MOUNT (while using the heater as a fixed convector on the wall)
Please note that the product must be installed at least 15 cm from the floor and 50 cm from the
ceiling.
- For wall mounting:
1. Take the bracket from the wall and mark the anchor points where you will need to drill the holes.
2. Drill the holes, insert the dowels the size of the hole and fix the bracket on the wall with the corres-
ponding screws, see picture 2.
3. Place the heater in the correct position, making sure it is aligned with the bracket, see image 3.
4. Tighten the screw at the top of the bracket to make it more secure and firm.
OPERATION
Insert the plug into a suitable outlet on an AC power source that has the same voltage as that shown
on its 220 / 240V-50 / 60Hz rating label.
The touch screen buttons located on the product correspond to the remote control functions:
INSTRUÇÕES IMPORTANTES DE SEGURANÇA / IMPORTANT SAFETY INSTRUCTIONS
1. Display
2. Receiver
3. Minute button
4. Mode button
5. Button configuration
6. Heating button
7. Temperature "+" and button for setting the
start time.
8. "-" temperatures and stop the tim setting
button.
INSTRUCCIONES IMPORTANTES DE SEGURIDAD