Top Panel - M-Audio OXYGEN PRO25 Guia De Inicio Rapido

Features

Top Panel

23 24
21
9
8
5
2
3
4
Note: Text below accompanying keyboard controls indicates secondary functions that can be accessed by
pressing Shift while using the control.
1. Keybed: This velocity-sensitive keybed is the primary method of sending Note On/Off MIDI data. In
addition to being velocity sensitive, the keybed also includes channel aftertouch, which means you can
affect the sound a virtual instrument plugin makes by varying how much pressure you apply on the key
after initially pressing the key.
Hold Shift and press keys C2–Bb3 to edit Chord Mode settings. See
Keyboard's Internal Functions
2. Octave Buttons: Press these buttons to adjust the pitch range of the keys up or down one octave.
Hold Shift and press these buttons to adjust the pitch range of the keys up or down one semitone. The
keyboard can be raised up to five octaves or lowered down to four octaves from its default octave
range and a total of twelve semitones from its default transposition.
To reset Oxygen Pro 25 to its default octave range and transposition (C2–C4 on the keybed), press the
Octave - and Octave + Buttons simultaneously.
3. Pitch Bend Wheel: Roll this wheel up and down from the center position to bend the pitch of the
keyboard while playing. The default range of the pitch-bend will vary between software synths. The
wheel is spring mounted and will return to the center position when released.
4. Modulation Wheel: Move this wheel to send continuous controller data—MIDI CC #01 (modulation), by
default.
5. DAW/Preset Button: Press this button to set Oxygen Pro 25 to operate in DAW Mode or Preset Mode.
When in DAW Mode, this button's LED will be brightly lit. When in Preset Mode, this button's LED will
will be off. Hold Shift and press this button to edit a Preset or User DAW. After editing the Preset or
User DAW, press this button again to save your changes to the User DAW or Preset. Press and hold the
button to open the DAW/Preset Select menu on the Display.
See Setup > Setting the Keyboard's Operation Mode
See Operation > Using Custom Mappings
6. Display: The main Display screen shows the status of the last used control. Use this screen to monitor
parameter levels as you adjust controls on the keyboard. Also, use the Display along with the
Select/Scroll Encoder to view and edit keyboard settings. See
more information on the Display.
18
17 16
12
10 11
6
13 14 15
7
to learn more about this feature.
22
19
1
for more information on DAW/Preset Mode.
for information on mapping presets.
Operation > Using the
Operation > Display Overview
20
for
5