Tabla De Contenido; Product Specifications Kncm-11Ma; Safety Instructions; General - KNOVA KN CM-11MA Manual De Instrucciones

TABLE OF CONTENTS
Product specifications KNCM-11MA .................................. 1
Safety instructions .............................................................. 1
General ................................................................................ 1
Additional safety rules for this product ............................... 2
Electrical requirements ....................................................... 2
Accessories and attachments ............................................. 3
Carton contents .................................................................. 3
PRODUCT SPECIFICATIONS KN CM-11MA
Attention: Please choose proper power source, voltage and frequency that are shown in the label for your tool.
Motor power:
Max cutting width:
Max cutting depth:
Cutterhead rotation speed: 10 000 RPM
Number of blades:

SAFETY INSTRUCTIONS

WARNING
When using electric tools, basic safety precautions, including the following, should always be followed to reduce
the risk of fire, electric shock and personal injury. Read all these instructions before operating this product and save
the instructions.

GENERAL

1. Read and understand manual.
For your own safety, read and understand the entire
instruction manual before operating the machine.
2. Read and understand warning label.
Read and understand the warning labels posted on
the machine. Failure to comply with all of these labels
may cause serious injury.
3. Keep work area clean.
Cluttered areas and benches invite injuries.
4. Consider work area environment.
Do not expose power tools to rain. Do not use power
tools in damp or wet locations. Keep work area well lit.
Do not use power tools where there is risk to cause fire
or explosion.
5. Guard against electric shock.
Avoid body contact with earthed or grounded surfaces
(e.g. pipes, radiators, ranges, refrigerators).
6. Keep children away.
Do not let visitors touch the tool or extension cord.
All visitors should be kept away from work area.
7. Store idle tool.
When not in use, tools should be stored in a dry,
high of locked up place, out of reach of children.
8. Do not force the tool.
It will do the job better and safer at rate for which
it was intended.
CAUTION: Read and follow all Safety Rules and operating Instructions
before First Use of this Product. Keep this manual with tool.
1 100 W
Table Size:
6" (153 mm) Fence Size:
1/8" (3 mm)
Dust collection port:
Fence angle:
2 blades
Assembly ........................................................................... 4
Operation instructions ....................................................... 5
Maintenance ...................................................................... 8
Troubleshooting ................................................................. 8
Exploded view .................................................................... 9
Parts list ............................................................................ 10
Notes ................................................................................. 22
28-1/2" x 6-1/4" (725 x 160 mm)
21" x 4-1/4" (530 x 110 mm)
2-1/2" (60.5 mm)
45º - 90º
9. Use the right tool.
Do not force small tools or attachments to do the job
of a heavy duty tool. Do not use tools for purposes not
intended; for example, do not use circular saws to cut
tree limbs or logs.
10. Dress properly.
Do not wear loose clothing or jewellery, they can be
caught in moving parts. Rubber gloves and non-skid
footwear are recommended when working outdoors.
Wear protecting hair covering to contain long hair.
11. Use safety glasses and hearing protection.
Also use face or dust mask if the cutting operation
is dusty.
12. Do not abuse the cord.
Never carry the tool by the cord of yank it to disconnect
it from the socket, Keep the cord away from heat,
oil and sharp edges.
13. Do not overreach.
Keep proper footing and balance at all times.
14. Maintain tools with care.
Keep cutting tools sharp and clean for better and safer
performance. Follow instructions for lubrication and
changing accessories. Inspect tool cord periodically and
if damaged have it repaired by an authorized service
facility. Inspect extension cords periodically and
replace, if damaged. Keep handles dry, clean and free
from oil and grease.
1