Switching Between Fahrenheit And Celsius; How To Take A Reading - HealthSmart 18-210-000 Manual De Instrucciones

Switching Between Fahrenheit and Celsius

This thermometer is set to measure in Fahrenheit, but can be switched to
measure in Celsius.
To switch from Fahrenheit to Celsius
1. Press the SCAN button to turn the thermometer ON. It will now be in Standby
mode measuring ambient temperature.
2. Press and hold the M (Memory) and S (Set) buttons for 2 seconds until the
screen changes from °F to °C. Once the thermometer beeps, the unit is ready
for measurement.
NOTE: To switch the mode again, wait until the unit beeps and then press and
hold the SET button again until the mode switches.
Stored readings in memory will automatically be converted to the new
temperature scale (°F to °C ) that is selected.

How To Take A Reading

The ear is an ideal measurement
site because body temperature
is regulated by the hypo-
thalamus, which shares the same
blood supply as the tympanic
membrane or more commonly
called eardrum.
NOTE: Make sure the measurement sensor is clean before
taking a reading. Attempting to take a measurement
anywhere else on the body may result in an inaccurate
reading.
1. Remove the probe cap before using and make sure the
probe is clean before using, Fig. 1.
2. If the thermometer is OFF, press any button to turn it ON.
The screen should display the ambient temperature, Fig 2.
8
FIG. 1
FIG. 2