Electrical Connection - FIM M Serie: C Serie Manual De Uso Y Mantenimiento

BEFORE ELECTRICAL INSTALLATION
Before connection you must:
check that the electrical data indicated are in conformity with the main voltage and
■
frequency values of the building where the hood is to be installed;
check that the building is fitted with electric safety systems to protect against short circuits
■
and electric shock systems, according to the laws in force;
install an electric socket (or connection point) with a bipolar switch, which has contacts with
■
an opening of at least 3 mms;
if it is wished to install the hood with a plug, it is necessary that you have access to the
■
plug;
always turn off the main voltage supply by means of the bipolar switch before connecting
■
and switch on again only when connections have been completed, tested and are safe.

ELECTRICAL CONNECTION

WARNING
The electrical connection can only be carried out by qualified professional personnel, using
standard material and state of the art installation methods. The manufacturer declines any
responsibility for installations carried out by unskilled persons and for installations which are not
in conformity with the standard norms concerning electrical safety (both concerning methods
and materials).
ELECTRICAL TECHNICAL DATA
The electrical technical data are visible inside the hood after the removal of the grease filters.
CONNECTION TO THE POWER SUPPLY
The flexible feed cable supplied is already connected internally and emerges from the hood near
the air outlet duct.
It is possible to effect two types of electric installation:
fixed installation;
■
installation by means of plug on a socket.
■
PRECAUTIONS TO BE TAKEN IF REPAIRS ARE TO BE
CARRIED OUT
Repairs, including the replacement of the feed cable if necessary, are to be carried out only by
qualified personnel, using standard methods, instruments and materials. Any repairs carried out
by others could prove to be dangerous and could be a fire risk.
22