KidTrax KT1003 Guía De Uso página 12

Get to Know Your Fire Engine Before Driving
Shifter
IMPORTANT! The Fire Engine MUST come to a complete stop before shifting
into reverse and into low or high speed. Damage to the gears and motor WILL
occur.
Shifter
A
The shifter controls the Fire EngineÕs
speed and forward/reverse.
Low speed
B
Low speed (2-1/2 mph) is for
beginning drivers. See page 13 for
instructions.
Reverse
C
Reverse (2-1/2 mph) is used for
backing up. See page 13 for
instructions.
D
High speed
High speed (5 mph) is for more advanced drivers. See page 13 for instructions
to unlock the shifter.
Pump Action Fire Nozzle
1 Twist off the cap (Figure 1).
2 Fill the 1 liter tank with water and
secure cap.
3 Pump the pumping handle 8-10 times
(more pumping equals more pressure)
(Figure 1a).
4 Press the water trigger (Figure 1b).
5 When water stops spraying out, pump
again or refill.
NOTES:
• Avoid spraying the megaphone and
steering wheel with water.
• If needed, tank can be drained from
underneath vehicle. Read important
instructions before draining tank (see
page 17).
12
A
1
1a
1b
C
B
D