Operation - Rena Ware Aero Quattro Manual Del Usuario

Stage 4 High Capacity Activated Carbon Filter: Aero ✓'s air filtration
process continues with a high capacity carbonized filter pad
acting like a sponge to filter the air stream by absorbing a
wide range of gases, chemicals, and odors.
Stage 5 Ionization: The Ionization feature works continually to emit a mild charge
that freshens stale room air.
The final result is filtered air re-circulated two times per hour in a room 4.7m x
6m (15 ft. x 20 ft.) giving a cleaner, more comfortable environment.

OPERATION

The operation of Aero ✓ Quattro is simple. Plug your air filter into a properly
grounded power source. When turning the power on, the fan speed will
automatically start at the "medium" setting, then adjust itself to the "low" setting.
You may then press the electronic control switch marked "ON/SPEED" to the
desired low, medium, or high speed — this will automatically turn on your
ionization stage as well. Note: do not place any items on top of your air filter.
WARNING!
"DO NOT USE AN EXTENSION CORD! THIS UNIT HAS A
GROUNDED-TYPE PLUG TO AVOID THE RISK OF SHOCK."
REPLACEMENT
INDICATOR LIGHT
ON/SPEED: Turns filter on and toggles fan speed between low, medium,
and high.
OFF: Turns filter off.
FAN SPEED INDICATOR: Indicates fan speed (low, medium, or high)
IONIZER: Shows Ionizer is functioning.
REPLACEMENT INDICATOR LIGHT: Shows when to replace filter.
RESET BUTTON: The Reset Button can be used to reset filter life timer after
replacing filter cartridge. To do this, push and hold button for 5 seconds and the
Replace Filter light will go out and the timer will be reset.
RESET
OFF
IONIZER
3
FAN SPEED
INDICATOR
ON/SPEED
A