Usb Connection - Pulsar DIGIFORCE 860RT Manual Del Usuario

About device
This menu option shows the following service information about your
device:
Name: Digiforce 860RT (name of the unit)
SKU: 78093 (model number)
Serial: 70119307 (serial number)
SW: 12.34.567.A (software version)
HW: MNV001 (hardware version)
11
DIGITAL ZOOM FUNCTION
This function allows you to control the unit's ZOOM mode. The display
shows the full magnification value which is the sum of the optical and
digital magnification.
You can use the ZOOM function only in VIDEO and PHOTO modes.
To activate the zoom, briefly press the ZOOM (7) button.
Cycle through the available full magnification options by briefly
pressing the ZOOM button: 6.5x>13x>6.5x.
Setting retention. The digital zoom value is retained only during the
current session.
When the unit is next switched on, the full magnification value reverts
to 6.5x.
12
BUILT-IN IR ILLUMINATOR
The unit is equipped with a built-in IR Illuminator with a wavelength of
810 nm.
You can control the IR Illuminator in the VIDEO and PHOTO modes.
To activate the Illuminator, briefly press the IR (5) button.
IR Illuminator power level indication. When the IR Illuminator is set
to position IR1; IR2; IR3 the display shows the corresponding icons
To switch between IR power levels, successively press the IR button
to cycle through the available options: IR1->IR2->IR3 ->IR1...
To switch off the IR Illuminator, hold down the IR button. The icon is
not displayed.
The IR Illuminator power level is not saved.
You cannot control the IR Illuminator when operating the unit in
REVIEW mode.
Upon activation of REVIEW mode, the IR Illuminator switches off, the
power level is saved, and the icon is not shown on the display.
13
Upon exiting REVIEW mode, the IR Illuminator reverts to the power
level selected before deactivation, with the corresponding icon
shown on the display.
13
DISPLAY OFF FUNCTION
This function deactivates the display, which allows you to eliminate light
exposure caused by the glowing display.
You can operate the DISPLAY OFF function in two modes: VIDEO
and PHOTO.
To turn the display off, press and hold down the ON (4) button for more
than a second.
The message DISPLAY OFF appears on the black display.
To activate the display, press and hold down the ON button for more
than a second.
When the DISPLAY OFF function is activated:
All controls are inactive (except for the ON button).
Video recording continues (if video was recording before activating
the DISPLAY OFF function).
The Wi-Fi function keeps running.
The DISPLAY OFF function deactivates when:
The ON (4) button is briefly pressed.
The unit is connected to a PC via the USB port or to an external
portable power supply (in this case the display should activate and
the unit switches to operating mode).
14

USB CONNECTION

The unit can be connected to a PC via the USB port (11). The PC will
detect the unit automatically, no driver installation is necessary.
Connection options.
When the activated unit is connected to a PC via the USB port (11), one
of the following connection options is selected:
USB Mass storage device
If this option is selected, the unit is detected by the PC as a flash card.
The unit switches to USB power.
This option is designed for use when working with files saved in the
unit's memory. In this mode the unit's functions are not available and
the unit is "off".
14