Fan Speed - Zenith ZW5010 Manual Del Propietário

Operating Instructions
CAUTION: If you turn off the air conditioner or switch from cooling to
the fan, wait at least 3 minutes before setting to cooling again.
Power
Turns air conditioner on and off.
Fan Speed
Use to set the fan speedto LOWor HI.
Mode/Temp Control
Use to set the air conditioner to the Fan Only or the Cool On mode.
Fan Only Mode
Use Fan Only at HI or LOW Fan Speed to provide air circulation and filtering without cooling.
Cool On Mode
Use Cool On with HI or LOW Fan Speed for cooling. Turn the knob toward the cooler area for
the indoor air to become cooler. Turn the knob toward the Cool On area for the indoor air to
become warmer. The Mode/Temp control is used to maintain the room temperature.
When set in the Cool On mode, the compressor will cycle on and off to keep the room at the
same level of comfort.
Cooling Descriptions
For Normal Cooling - Select the Cool On mode with the Mode/Temp knob set at the midpoint.
For Maximum Cooling - Select the Cool On mode with the Mode/Temp knob set toward the
cooler area.
For Quieter & Nighttime Cooling - Select the Cool On mode with the Mode/Temp knob set
toward the Cool On area.
NOTE: If you move the Mode/Temp control knob from the Cool On setting to the Fan Only
setting, wait at least 3 minutes before switching back to a Cool On setting.
16 Room Air Conditioner