General Outline; General Safety - BFT T-BOX Instrucciones De Instalación

ENGLISH

GENERAL OUTLINE

Thank you for buying this product, our Company is sure
that you will be more than satisfied with the product's
performance. The product is supplied with a "Warnings"
leaflet and an "Instruction booklet". These should both
be read carefully as they provide important information
about safety, installation, operation and maintenance.
This product complies with the recognised technical
standards and safety regulations. We declare that this
product is in conformity with the following European
Directives: 99/5/CEE (and subsequent amendments).

GENERAL SAFETY

WARNING! An incorrect installation or improper
use of the product can cause damage to persons,
animals or things.
• Scrap packing materials (plastic, cardboard, poly-
styrene etc) according to the provisions set out by
current standards. Keep nylon or polystyrene bags
out of children's reach.
• Keep the instructions together with the technical
brochure for future reference.
• This product was exclusively designed and ma-
nufactured for the use specified in the present
documentation. Any other use not specified in this
documentation could damage the product and be
dangerous.
• The Company declines all responsibility for any
consequences resulting from improper use of the
product, or use which is different from that expected
and specified in the present documentation.
• Do not install the product in explosive atmosphere.
• Only use original parts for any maintenance or repair
operation.
• Instruct the product user about the control systems
provided and the manual opening operation in case
of emergency.
• Keep radio control or other control devices out of
children's reach, in order to avoid unintentional
automation activation.
• The user must avoid any attempt to carry out work or
repair on the automation system, and always request
the assistance of qualified personnel.
• Anything which is not expressly provided for in the
present instructions, is not allowed.
MAINTENANCE
System maintenance is to be regularly carried out
by qualified personnel.
When the T-BOX unit's Red LED flashes after entering
the correct code, it means the batteries are low. Repe-
at the installation procedure in reverse and have the
batteries replaced.
8 - 8 -
T-BOX T-BOX
INSTALLER WARNINGS
DISPOSAL
ATTENTION: disposal should only be carried out by
qualified personnel.
Materials must be disposed of in conformity with the
current regulations. In case of disposal, the system
components do not entail any particular risks or danger.
In case of recovered materials, these should be sorted
out by type (electrical components, copper, aluminium,
plastic etc.)
The descriptions and illustrations contained in the
present manual are not binding. The Company
reserves the right to make any alterations deemed
appropriate for the technical, manufacturing and
commercial improvement of the product, while
leaving its essential features unchanged, at any
time and without undertaking to update the present
publication.