Shield Replacement - Sweiss SKYVIEW 710G Manual De Instrucciones

9. SHIELD REPLACEMENT

Clever Shield REPLACEMENT
This goggles should be used together with clever shield. Shown in the following
10. PRECAUCIONES
1. The google is not suitable to laser welding and oxy-acetylene welding.
2. Do not put goggle near to heat or damp areas.
3. Do not open the goggle except following operationes in this user manual.
4. Please check whether welding / grinding area is chosen before use.
5. Protective lens must be installed on the outside of the goggles. Otherwise, goggles may be
damaged.
6. Do not make any amend or replacement of goggle without authorization.
7. Please inmediately stop using goggles and contact your dealer if ter is not becoming darker in
welding process.
8. Do not use alcohol, gasoline or diluents to clean goggle. Do not put the goggle into water.
9. The reaction of goggle will be slower if the ambient temperature is low but it will not a ect
protective functions.
10. Please replace the goggles inmediately if it is broken or scratched because it will a ect yur view
and seriously reduce protective performance.
11. Please replace protective lens inmediately if it is broken or scratched. Do not use hard objects to
contact the glasses of the ter.
12. Please clean the surface of the goggles and sensors regularly.
13. Goggle cap cannot resist damage caused by violent hits, explosions or corrosive liquids.
Notice if the user does not follow the above intentions, it may result in serious personal
injuries.
Buckle point insert into screw holes
12