Dab - auna Areal Bar Connect Manual De Instrucciones

EN
FM
FM radio mode receives analogue radio from the FM band
Press Left/Right button on the device or using the Left/Right button of
remote control to search FM station, The frequency display starts to run up
as the device scans the FM band, It stops when it has received a station. You
may press UP/DOWN on the remote control to tune station manually, Each
step moves 0.05MHz.
Preset and Recall
Press and hold the Preset button on the device or press the FAV+ button on
the remote control to save the station.
You can save up to 99 station, Press PRESET button on the device or FAV
button on the remote control, then press on the remote control or press
PRESET button on the device to recall the saved station.
Alternatively, you can let the system scan ALL station for you by
pressing ENTER or Scan on the remote control, The searched station will
automatically be stored in preset station list.

DAB

Press the MENU button or on the remote control and device (if in FM
mode) to switch to DAB mode. The display will show 'DAB Mode'.
*To listen to the stored DAB stations use either up and down buttons or
either Left and Right buttons on the retome control to cycle through the
stations . When you reach the desired station press the OK button on the
remote control and the Enter button on the device in to begin playback of
that station.
DAB quick scan
Press the left button button on the device and remote control to begin the
scan .You will see the scan slide chart to indicate the progress .
Once the scan has finished, the radio will select the first alphanumeric
station and begin playback .
Preset and Recall
Press and hold the Preset button on the device or press the FAV+ button on
the remote control to save the station.
You can save up to 99 station, Press PRESET button on the device or FAV
button on the remote control, then press on the remote control or press
PRESET button on the device to recall the saved station.
58