EDM Product 07592 Manual De Instrucciones página 15

INSTRUCCIONES IMPORTANTES DE SEGURIDAD
07592
REF.
INSTRUÇÕES IMPORTANTES DE SEGURANÇA / IMPORTANT SAFETY INSTRUCTIONS
- Cleaning for the shaving unit:
1- Clean the shaving unit every week
2- Clean the top of the appliance with the supplied brush.
3- Press the release button and take off the unit( fig.11).
4- Brush the hair chamber( fig.12)
5- Put the shaving unit back onto the shaver.
- Cleaning for the shaving heads
1- Clean the shaving heads every two months.
2- Press the release button and remove the shaving unit(fig.11).
3- Anticlockwise take out the frame( fig.13)
4- Slide the shaving heads out of the retaining frame one by one.(Note:-
do not exchange the group of cutters and guards,or else it will effect the
shaving performance ( fig.14)
5- Clean the cutters with brush ( fig.15)
6- Clean the guards with brush ( fig.16)
7- You can also clean the shaving heads with a degreasing liquid(e.g.Al-
cohol)when needed.If you do, lubricate the shaving heads with a drop of
sewing machine oil after cle- aning.This prevent wear of the shaving
heads( fig.17)
8- Slide the shaving heads back into the retaining frame and put the
retaining frame back into the shaving unit.
SHAVING HEADS REPLACEMENT
- Replace the shaving heads every two years for optimal shaving perfor-
mance.
- Use shaving heads to replace damaged or old one.That makes you get
the better shaving performance.
BATTERY DISPOSE
- The battery used in this shaver contains material that will pollute the
environment.If you need to dispose the sha- ver,please dismantle the
batteries and turn them to the fomal collection places.
- You yourself also can dismantle the battery in the shaver( fig.18)
- Before dismantle the battery,the shaver must be cut from the power
and without any remaining electricity in it. If there is remaining electrici-
ty,turn on the shaver until motor stops.
- Dismantle the battery (fig.19).
- After dismantling the battery,do not connect the shaver to the AC
outlet.