Publicidad
Fig. 8
Heater Strip Detail
WARNING!
This unit is frost resistant down to 0
Prevailing winds can reduce the ability of the heater
element to prevent light freezing. If the ambient air
temperature will drop below 0
be drained of all water by blowing out all water lines
and drain trap. A heater strip is used to heat the
unit and will begin to cycle at 40
at this temperature will ensure the heater is working
and the unit is resistant to light freezing.
ALSO, MAKE SURE THERE ARE NO PLASTIC OR
FLAMMABLE COMPONENTS DIRECTLY ABOVE
THE HEATER STRIP.
98228C (Rev. B - 1/09)
(L)VRCD*A
8
8
39
34
37
35
38
42
27
°
F with no wind.
°
F, the cooler needs to
°
°
+/- 5
F. A check
VRCDFR*A
Fig. 7
Thermostat Installation Detail
41
36
Wiring Diagram
Page 6
42
GND
WHT
HEATER
HEATER
SWITCH
BLK
HEATER
THERMOSTAT
Publicidad
