Technical Specifications - DOMUS LINE SMART TOUCH MIRROR Manual De Instalación

INSTALLATION MANUAL

TECHNICAL SPECIFICATIONS

Input voltage: 220–240Vac
Output voltage: 12–24Vdc
Maximum applicable load:
15W (with 12Vdc power supply)
30W (with 24Vdc power supply)
WARNINGS
Safety is guaranteed if these instructions are followed
and therefore they must be kept. Installation may
require qualified personnel to be involved. Before
proceeding with installation of the device ensure that
the environmental conditions are in compliance with
and suitable for the product characteristics. Before any
operation on the device remove mains power.
SMART TOUCH MIRROR is a multifunction electronic
switch which allows LED devices that operate at 12Vdc
or 24Vdc to be controlled.
EN
WARRANTY
The warranty on the device is valid only if powered by a
power supply provided by DOMUS Line. The warranty
general terms and conditions for this device are
available at www.domusline.com