Removing The Bag; Removing The Ramps - Canon imagePROGRAF TZ-30000 Manual De Instalación

3

Removing the Bag

1
Remove all the tape from the front and rear surfaces (3 locations each), and the left and right sides (2 locations each), and
then remove the bag in the direction of the arrow.
Important
● Do not remove the sheet from underneath the printer. You will remove this after Step 6.
● Dispose of the removed bag in accordance with the regulations of your local government.
4

Removing the Ramps

1
Remove the ramps at the top of the pallet in the directions of the arrows.
Note
● The ramps are used in "6. Lowering the Printer from the Pallet."
3