D-Link mydlink DCH-S160 Guía De Instalación Rápida página 5

ATTACHING THE SENSOR
DCH-S160
DCH-S160
DCH-S160
Step 1:
If you haven't already done so, add the DCH-S160 to your Wi-Fi
network. Refer to the previous page for details.
Step 2 ( Optional ) :
If your desired place of detection is out of range, first connect the
included RJ-11 extension cable to the device, then attach the sensor
cable.
Step 3:
Connect the supplied RJ-11 sensor cable to the RJ-11 port on the
bottom of the DCH-S160.
Step 4:
Attach the supplied cable clips to the cable and screw them down to
secure the cable to the wall/floor.
3