Inputs & Controls - ANT iROLLER 8 Manual De Uso

3 | DESCRIPTION
3.1 | INPUTS & CONTROLS
1
2
3
5
1 CH 1 LEVEL
This knob adjusts the level of the microphone channel, turn it to the right to raise
the level, to the left to decrease it.
2 CH1 MIC/LINE
This switch allows to choose input signal sensitivity.
3 CH1 INPUT
Balanced mic/line input (combo XLR-F/ jack 6,35mm. - 1/4"). An unbalanced jack
microphone cable can also be used.
4 CH 2 LEVEL
This knob adjusts the level of CH2, turn it to the right to raise the level, to the left
to decrease it.
5 L/MONO, R INPUT
2 x 6.35mm (1/4") unbalanced line input jack sockets. In case of mono signal just
connect a jack to the L/MONO input.
iROLLER 8
4 User manual |
4 6
7
8
9
6 CH3 MEDIA PLAYER
Media Player control section, for details read chapter 4.0 MEDIA PLAYER
SECTION.
7 MEDIA PLAYER DISPLAY
Shows the operation of the Media Player according to its commands; for
details see chapter 4.0 MEDIA PLAYER SECTION.
8 USB INPUT
Input for USB stick with capacity up to 32 GB. To select USB as the signal
source, use the MODE button, or insert the key into the type A socket.
9 AUX IN STEREO
3.5mm stereo input for connecting external devices having this analog
connection.
10 REVERB
This knob adjusts the volume of the effect for channels 1 & 2; rotate it to
the right to raise the level, to the left to decrease it.
11 PEAK
LED indicating that overall output volume is too high, therefore it is necessary
to reduce the level of the MASTER knob or of the input channel.
12 MASTER
General system volume control.
13 CONTOUR
Equalization control that evens out listening to low volumes.
14 LINE OUT
Line level output for connection to other amplified systems or another
iROLLER 8.
10
13
11
12
14
iROLLER 8
5
| User manual