Publicidad
Idiomas disponibles
Idiomas disponibles
APPLICATIONS
Lexus
ES330
2004-2006
ES300
2002-2003
IS300
2002-2005
LS430
2001-2006
RX330
2004-2006
RX350
2007-2009
RX400H
2006-2008
SC430
2002-2010
2
Toyota
4-Runner (excludes Urban Runner) 2003-up
Avalon
2005-up
Camry
2007-up
Corolla
2005-2011
FJ Cruiser
2011-up
Highlander
2008-up
Matrix
2005-2012
Prius
2004-2011
Prius (3rd gen/PHV)
2012-up
Rav4
2004-up
Sequoia
2005-up
Sienna
2004-up
Solara
2004-2008
Tacoma
2005-up
Tundra
2006-up
Tundra (double cab)
2004-2005
Venza (without NAV)
2009-up
Venza (with NAV and
separate display)
2013-up
Yaris
2007-2011
CONNECTIONS TO BE MADE
From the 16-pin harness to the aftermarket radio:
• Connect the White wire to the left front positive speaker.
• Connect the White/Black wire to the left front negative speaker.
• Connect the Gray wire to the right front positive speaker.
• Connect the Gray/Black wire to the right front negative speaker.
• Connect the Green wire to the radio's left rear positive speaker.
• Connect the Green/Black wire to the radio's left rear negative speaker.
• Connect the Purple wire to the radio's right rear positive speaker.
• Connect the Purple/Black wire to the radio's right rear negative speaker.
• Connect the Blue/White wire to the amp turn-on/power antenna.
Note: The Blue/White wire must be connected or you will not hear sound from the factory
amplifier.
• The following wires on the 16-pin harness will not be used, tape up and disregard:
Red, Brown, Light Green, Blue/Pink, Green/Purple, Orange/White
• Connect the 16-pin harness to the TYTO-01.
Continued on the next page
Publicidad
