Product Specific Instructions; Special Precautions - Chicago Pneumatic CP8613 Manual Del Usuario

página de 161

/ 161
Contenido
Tabla de contenido
Marcadores

Tabla de contenido

Safety Information

• Remove any adjusting key or wrench before turning

the power tool on. A wrench or a key left attached to a

rotating part of the power tool may result in personal in-

jury.

• Do not overreach. Keep proper footing and balance

at all times. This enables better control of the power tool

in unexpected situations.

• Dress properly. Do not wear loose clothing or jew-

ellery. Keep your hair and clothing away from mov-

ing parts. Loose clothes, jewellery or long hair can be

caught in moving parts.

• If devices are provided for the connection of dust ex-

traction and collection facilities, ensure these are con-

nected and properly used. Use of dust collection can

reduce dust-related hazards.

• Do not let familiarity gained from frequent use of

tools allow you to become complacent and ignore tool

safety principles. A careless action can cause severe in-

jury within a fraction of a second.

• Hold the power tool by insulated gripping surfaces,

when performing an operation where the fastener

may contact hidden wiring. Fasteners contacting a

"live" wire may make exposed metal parts of the power

tool "live" and could give the operator an electric shock.

Power tool use and care

• Do not force the power tool. Use the correct power

tool for your application. The correct power tool will

do the job better and safer at the rate for which it was de-

signed.

• Do not use the power tool if the switch does not turn

it on and off. Any power tool that cannot be controlled

with the switch is dangerous and must be repaired.

• Disconnect the plug from the power source and/or the

battery pack, if detachable, from the power tool be-

fore making any adjustments, changing accessories,

or storing power tools. Such preventive safety measures

reduce the risk of starting the power tool accidentally.

• Store idle power tools out of the reach of children and

do not allow persons unfamiliar with the power tool

or these instructions to operate the power tool. Power

tools are dangerous in the hands of untrained users.

• Maintain power tools and accessories. Check for mis-

alignment or binding of moving parts, breakage of

parts and any other condition that may affect the

power tool's operation. If damaged, have the power

tool repaired before use. Many accidents are caused by

poorly maintained power tools.

• Keep cutting tools sharp and clean. Properly main-

tained cutting tools with sharp cutting edges are less

likely to bind and are easier to control.

• Use the power tool, accessories and tool bits etc. in ac-

cordance with these instructions, taking into account

the working conditions and the work to be per-

formed. Use of the power tool for operations different

from those intended could result in a hazardous situation.

• Keep handles and grasping surfaces dry, clean and

free from oil and grease. Slippery handles and grasping

surfaces do not allow for safe handling and control of the

tool in unexpected situations.

Battery tool use and care

• Recharge only with the charger specified by the man-

ufacturer. A charger that is suitable for one type of bat-

tery pack may create a risk of fire when used with an-

other battery pack.

• Use power tools only with specifically designated bat-

tery packs. Use of any other battery packs may create a

risk of injury and fire.

• When battery pack is not in use, keep it away from

other metal objects, like paper clips, coins, keys,

nails, screws or other small metal objects, that can

make a connection from one terminal to another.

Shorting the battery terminals together may cause burns

or a fire.

• Under abusive conditions, liquid may be ejected from

the battery; avoid contact. If contact accidentally oc-

curs, flush with water. If liquid contacts eyes, addi-

tionally seek medical help. Liquid ejected from the bat-

tery may cause irritation or burns.

• Do not use a battery pack or tool that is damaged or

modified. Damaged or modified batteries may exhibit

unpredictable behaviour resulting in fire, explosion or

risk of injury.

• Do not expose a battery pack or tool to fire or exces-

sive temperature. Exposure to fire or temperature above

130 °C may cause explosion.

• Follow all charging instructions and do not charge

the battery pack or tool outside the temperature

range specified in the instructions. Charging improp-

erly or at temperatures outside the specified range may

damage the battery and increase the risk of fire.

Service

• Have your power tool serviced by a qualified repair

person using only identical replacement parts. This

will ensure that the safety of the power tool is main-

tained.

• Never service damaged battery packs. Service of bat-

tery packs should only be performed by the manufacturer

or authorized service providers.