Connection To A Pc - Beyerdynamic Opus 910 Manual Del Usuario

1.8

Connection to a PC

The NE 911/912/914 receiver is fitted with an RJ 11 connector
order to operate several receivers with a PC they have to be connected as described below.
• Connect the OUT-socket of the first receiver (RX 1) with the IN-socket of the second receiver (RX 2),
connect the OUT-socket of the second receiver (RX 2) with the IN-socket of the third receiver (RX 3)
and so on.
• Connect the IN-socket of the first receiver (RX 1) to the converter.
• Connect the converter to the USB interface of the PC.
• By using the PC control software, 64 channels can be operated simultaneously at maximum.
• The distance between PC and receiver should not be too long, because to ensure high-speed
transmission the remote control cable should not be longer than 100 metres.
56
with an IN and OUT socket. In
12
USB PORT
RJ 11