By operating
in a range from in-gear idle speed up to upper limit r/min.
NOTE:
• This system will not function properly until engine is at normal operating tem-
perature.
• The troll mode system will not operate if the button is pressed when the remote
control lever is in the neutral position.
•For the multiple engines:
If the throttle of all engines are fully closed and one of engines is in-gear, it shifts
to the troll mode when the button is pressed.
•For the multiple engines:
In-gear idle speed of all engines is controlled at the same time.
• This icon appears on the screen of the Multi-Function Gauge that
was operated to get into the troll mode, and shows operatable Multi-
Function Gauge of the troll mode.
• This icon appears on the screen of the Multi-Function Gauge(s) that
did not be operated to get into the troll mode.
This icon appears on the screen of the Multi-Function Gauge(s) that
cannot operate the troll mode.
Example of the troll mode display on the Multi-Function Gauge that can operate the
troll mode.
Example of the troll mode display on the Multi-Function that cannot operate the troll
mode.
16
or
buttons, you can set and maintain a desired trolling speed