Haws 30-BPG212000W Manual Del Usuario página 31

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 48
30-BPG212000W
PARTS IDENTIFICATION
1. Handle
2. Upper grill plate
3. Upper plate release button
4. Bottom grill plate
5. Bottom plate release button
6. Power light
7. Ready light
8. Thermostat knob
9. Oil drip tray
10. Securing latch
11. Hinge release button
12. Scraper
Note: Do not use the scraper during cooking, it is used to remove crumbs from grill plates after use.
BEFORE INTITIAL USE
1. Remove all packaging.
2. Unwind the mains cable completely.
3. Press the upper / bottom plate release button to remove the upper / bottom grill plate. Clean them and other
accessories. NEVER IMMERSE THE MAIN BODY INTO WATER. See the "cleaning and maintenance" subsection
below for detailed instructions.
4. Insert the upper / bottom grill plates /oil drip tray into their respective positions before use.
Notice: When your grill is heated for the first time, it may emit slight smoke or odor. This is normal and harmless.
HOW TO USE
WARNING: The grill plates and metal surfaces of the upper housing and handle will become very hot during use. To
avoid a burn hazard, wear protective oven mitts when using and touch only the black part of the handle.
Place the product on a clean, flat, level, stable, heat-resistant surface with at least 4-6 inches of space on all sides
to allow adequate air circulation. For best results, lightly coat the cooking plates with a little cooking oil or cooking
spray.
The appliance has 3 cooking positions, adjust the upper plate to have 3 cooking positions according to the different
cooking purpose.
1.
Closed position:
The upper plate is closed or rests on the base. Use this position when heating the product and when grilling
most foods. In this position, food will cook quickly since both sides cook at the same time.
- 30 -
EN

Publicidad

Tabla de contenido
loading

Tabla de contenido