Remote Control - KlipXtreme Pristine KSB-220 Manual De Instrucciones

Remote control

In addition to the right-side panel buttons, an infrared remote control is included
which provides additional functions to allow greater control over the media
player.
1. Install the supplied batteries in the remote control following the correct
polarity as indicated inside the compartment.
2. In order for the remote to operate properly, ensure that it is pointed toward
the front of the soundbar.
1
2
5
6
7
10
3
4
8
9
Buttons
Press this button brie y to turn the soundbar
1. Power button
ON/OFF-Standby.
Press these butons brie y to increase or lower the
2. Vol. +/ Vol - button
volume coming from the soundbar.
3. button In USB or BT mode, press any of these buttons to
select the previous or next track on your play list.
Press this button brie y to start and pause media.
4. Play/Pause
Press this button to mute or unmute the soundbar.
and Mute button
This feature is only available in BT mode.
Press this button brie y to turn on the Bluetooth®
5. BT button
function and starts pairing the soundbar. Press and
hold this button to go back into pairing mode.
Press this button brie y to switch to the USB mode
6. USB button
and play audio stored in a USB ash drive.
Press this button brie y to switch to the optical digital
7. Opt button
mode to play audio coming from a device connected
to the optical digital port.
Press this button brie y to select the source device
8. Aux in button
connected to the 3.5mm input jack
9. COX button Use this button to activate the audio connection for
a TV, DVD player or receiver.
Press this button brie y to switch among the available
1. EQ button
equalizer sound e ects: EQ 1: Cine, EQ 2: Song,
EQ3: dlA.
Description