Timer Functions - auna multimedia KCD-20 Adendo Al Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

Bit rate : 32 kbps~320kbps, sampling rate : 32khz, 44.1khz and 48 kHz decodable
The performance of playing MP3 Disc is various from the quality of recording disc and the method of
recording. Furthermore, the searching lead-time for MP3-CD is longer than normal CD due to diffe-
rence format.
This unit provides 4 differences sound mode to enhance your listening experience. You can select the desi-
red effect by pressing PRESET EQ repeatedly at following sequence: FLAT - CLASSIC - ROCK - POP - JAZZ.
Connect another audio device, e.g. (portable) CD player, MP3 player, (portable) Cassette player, etc. to this
system via a audio cord with RCA plugs (not supplied). Connect one end of this cord to the external device
and the other end to the Aux-In jack on the back of the unit.
When connected in this way and select to Aux mode by Function button. It is possible to play back the music
already on the connected device.
Press and hold TIMER to enter the timer setting mode, the first digits of display and timer icon will flash.
Press VOL+/- to adjust the countdown minute. The display will run up from 1 minute to 120 minutes maxi-
mum. Press TIMER to confirm the countdown time and then press VOL+/- to adjust the beep tone volume
level. Press TIMER to complete the timer setting. System will start to countdown automatically and display
will change to countdown state. Once countdown was arrived, beep tone sound will ring.
Please note:
There are about 6 seconds for timer setting mode, this system will return to normal mode automati-
cally if no keys being pressed in this time frame.
You still can enjoy your music during timer countdown. Once countdown was arrived, the system will
generate a bee tome sound instead of your playing music, just press TIMER to switch off the timer beep
sound then your music will resume playing.
You also can disable the timer function anytime by press TIMER until the timer icon disappears.
Press SLEEP repeatedly to activate and adjust the sleep timer (90mins - 80mins - ... - 10mins). The device will
set itself to standby after the set timespan.
22
MP3 Files: Format Requirements
EQ Presets
AUX Connection

Timer Functions

Cooking Timer
Sleep Timer

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

10029159

Tabla de contenido